
This twin turbo Challenger build started at Gas Monkey Garage. Richard Rawlings had a rare 2023 Dodge Challenger Swinger sitting at Gas Monkey Garage: 392 HEMI, six-speed manual, shaker hood. He loved everything about it except one thing. It needed more punch. His goal was over 700 horsepower from a kit his crew could bolt on in a weekend, with no fabrication. So he called John Urist at Hellion Turbo.
A rare Mopar with a six-speed

Richard calls the Swinger one of the rarest Mopars Dodge has put out, and what makes it special is the six-speed manual. He wanted it to run with the Hellcats and “really put some power down on the ground,” without cutting up a car this rare.
What’s in the Hellion twin turbo kit

Hellion has been building bolt-on turbo kits since 2004, and the LX platform kit (Charger, Challenger, Magnum and 300) has been in the lineup since 2008. John walked Richard through the box:
- Twin 62 mm turbos, one T4 turbo per side, set at 5 psi for this build. They make boost from a high idle, and the same turbos can make upwards of 1,300 HP with supporting mods.
- Turbo manifolds with 2-inch primaries that fit the space under the car. Newer kits now ship with Hellion’s cast stainless manifold, shown in the video.
- Front-mount intercooler, hand-welded and made in the USA. It mounts in the grille, and airflow and air conditioning work the same as stock.
- Mechanical oil scavenge pump designed by Hellion. It bolts to the front of the engine, pulls oil out of the turbos and returns it to the engine. No drilling the oil pan, no cutting.
- Everything in the box: every bolt and fitting, packed in the same order as the install checklist. No runs to the parts store.

The ultimate street sleeper

On top, everything stays. The shaker hood stays, and the only visible change is a black powder-coated intake pipe. Pop the hood and most people won’t know it’s turbocharged until they hear it. As John puts it, you can tell them nothing or everything.
The tune
Jeremy Satera at Satera Tuning remote-tuned the car. The file plugs in under the dash, and the car fires up and drives like it did before. Under boost, it has the fuel to make the power.
Install day and the first drive
Richard wanted to see what “just an average dude with a toolbox” could do with it, and the Gas Monkey crew put it together in the shop. Then Kenny took it out on the road.

With the twin turbos on here, even just at cruising speed, the car just feels a lot lighter and a lot happier. Just way more snap to it. It’s a tribute to the last muscle cars, and it needs to have some muscle. It definitely has it now.
Kenny, Gas Monkey Garage
The build at a glance
| Car | 2023 Dodge Challenger Swinger |
| Engine | 6.4L (392) HEMI |
| Transmission | 6-speed manual |
| Turbos | Twin 62 mm, T4 flange |
| Boost | 5 psi |
| Power | 700+ HP |
| Fabrication | None. Bolt-on. |
| Tune | Remote tune by Satera Tuning |
For a ’23 Scat Pack Challenger, the Hellion Turbo kit is a must.
Kenny, Gas Monkey Garage
Twin turbo Challenger FAQ
Which cars does this kit fit? 2006โ2023 Challenger, Charger, 300C and Magnum with the 5.7L, 6.1L or 6.4L HEMI.
Do I have to cut or drill anything? No. The kit bolts on, and the mechanical scavenge pump means no drilling the oil pan.
Does the shaker hood still fit? Yes. The Swinger in this video kept its factory shaker hood.
How much power will it make? This car runs about 700+ HP at 5 psi. The twin 62 mm turbos can make upwards of 1,300 HP with supporting mods and the right tune.
Can I install it myself? Richard’s goal was a kit an average guy with a toolbox and a couple of buddies could install in a weekend, and every part comes packed in checklist order. Questions before you buy? Call or text us.
Get the kit

The Hellion 2006โ2023 HEMI 5.7L / 6.1L / 6.4L StreetSleeperยฎ Hidden Twin Turbo System is the kit used on this Challenger. It fits the Challenger, Charger, 300C and Magnum. Bolt-on, built in the USA.
Questions? Call or text 505-873-4670 or email sales@hellionturbo.com. Watch more builds and dyno pulls on our YouTube channel.
